Viking VIPR102 Benutzerhandbuch

6

Downdraft Ventilators

VIKING RANGE, LLC

PREPARE THE DOWNDRAFT

The downdraft is shipped without a blower. Purchase a Model 
VEDV900 or VEDV1200 Exterior Blower and mount the 10" 
discharge plate to the downdraft as follows:

1.  Place the downdraft on its back on a table of fl at work surface.

2. Remove the 4 nuts and 2 clamp channels.

3. Remove 2 screws and the gear motor cover.

4.  Carefully position the10" discharge plate under the bottom 

fl ange of the downdraft.

5. Connect motor plug.

6.  Replace the gear motor cover and 2 sheet metal screws.

7.  Replace the 2 clamp channels and start the 4 nuts, do not 

tighten.

8.  Slide blower left of right to desired position. Use cover plate 

(supplied) to close up any open space.

9.  Tighten 4 nuts to secure top of blower. Use additional screws 

(supplied) through bottom fl ange to secure bottom of dis-
charge plate.

NUTS

COVER 

PLATE

CLAMP 

CHANNELS

SCREWS

GEARMOTOR 

COVER

MOTOR 

PLUG

10" ROUND 

DISCHARGE 

PLATE

ADDITIONAL 

SCREWS

BOTTOM 

FLANGE