Vermont Casting 43LDVT Benutzerhandbuch

19

When installing the 36LDVT, 39LDVT or 43LDVT with a 
vertical through-the-roof configuration flue system, the 
restrictor plate (#10008048) supplied with the appliance 
MUST BE FITTED TO THE APPLIANCE at the instal-
lation.
NOTE: Do not use the restrictor plate supplied with 
the vertical termination cap.
1.  Remove the rear log support. Save the two (2) 

screws.

2.  Remove the two (2) nuts and save them.
3.  Place the restrictor plate (Fig. 34) and secure it with 

the two (2) nuts.

4.  Replace the rear log support to the same location 

as before and secure it with the screws removed in 
Step 1.

������
����������������
����

Rear Log Support

Restrictor Plate

FP1555

Fig. 34  Assembling the restrictor plate.