Amana HRV-150D Benutzerhandbuch
3
HRV Series
HRV 150D & HRV 200D
Introducing the NEW Heat Recovery Ventilators (HRV). As
with previous designs, incoming fresh outdoor air is filtered
before it is heated by the stale outgoing air through a
aluminum heat recovery core. The HRV then distributes the
preheated fresh filtered air throughout the home by direct
ductwork installed specifically for the HRV or through the
ductwork of a forced-air system.
with previous designs, incoming fresh outdoor air is filtered
before it is heated by the stale outgoing air through a
aluminum heat recovery core. The HRV then distributes the
preheated fresh filtered air throughout the home by direct
ductwork installed specifically for the HRV or through the
ductwork of a forced-air system.
FEATURES:
• Compact Design
• Electrostatic Filters (washable)
•
• Electrostatic Filters (washable)
•
Airflow Balancing Using Our Easy "TRUE" Motor
Adjustment
Adjustment
• External Screw Type Dry Contacts For Push Button
Timers, Dehumidistat, Crank Timer & Digital Control.
• Easy Core Guide Channels For Removing Core
• Better Packaging For More Protection In Shipping
• Better Packaging For More Protection In Shipping
OPTIONAL CONTROLS
• DMFC-REC – Digital Multi-Function Control
• MD-4W
• MD-4W
– Mechanical Low Voltage Dehumidistat
with On/Off Switch
• MD-2W
– Mechanical Low Voltage Dehumidistat
• RT-15M
– 15 Minute Push Button Timer
• CT-30M
– 30 Minute Crank Timer
• AQS
– Air Quality Sensor
External screw type dry contacts (provided)
SPECIFICATIONS
CASE 22 gauge galvanized steel on the HRV-200D & 24
gauge galvanized steel on the HRV 150D. Baked powder
coated paint. Insulated with 1" (25 mm) high density
polystyrene foam to prevent condensation and meet the
requirements of the Underwriters Laboratories 94HF.
gauge galvanized steel on the HRV 150D. Baked powder
coated paint. Insulated with 1" (25 mm) high density
polystyrene foam to prevent condensation and meet the
requirements of the Underwriters Laboratories 94HF.
MOTORS Two (2) German-manufactured, factory-balanced
ebm™ motors with backward curved blades. Motors come
with permanently lubricated sealed bearings guarantee long
life and maintenance-free operation. Seven (7) year limited
warranty.*
ebm™ motors with backward curved blades. Motors come
with permanently lubricated sealed bearings guarantee long
life and maintenance-free operation. Seven (7) year limited
warranty.*
CORE Aluminum heat recovery core configured for an
efficient cross-flow ventilation. Core is 9" x 9" (229 x 229
mm) with a 15" (380 mm) depth HRV 150D or 12" x 12"
(305 x 305 mm) with a 15" (380 mm) depth HRV 200D.
Cores are manufactured to withstand extreme temperature
variations.
efficient cross-flow ventilation. Core is 9" x 9" (229 x 229
mm) with a 15" (380 mm) depth HRV 150D or 12" x 12"
(305 x 305 mm) with a 15" (380 mm) depth HRV 200D.
Cores are manufactured to withstand extreme temperature
variations.
FILTERS Two (2) Washable Electrostatic Panel Type Air Filters,
HRV 150D is 8.5" (216mm) x 15" (380mm) x 0.125"
(3mm), HRV 200D is 11.75" (298mm) x 15" (380mm) x
0.125" (3mm).
HRV 150D is 8.5" (216mm) x 15" (380mm) x 0.125"
(3mm), HRV 200D is 11.75" (298mm) x 15" (380mm) x
0.125" (3mm).
CONTROLS External three (3) position (Low/Stand
By/Medium) rocker switch that will offer continuous
ventilation. We offer a variety of external controls.
(see optional controls)
By/Medium) rocker switch that will offer continuous
ventilation. We offer a variety of external controls.
(see optional controls)
DEFROST A preset 5 minute defrost sequence is activated at
an outdoor air temperature of 23˚F (-5˚C) and lower.
an outdoor air temperature of 23˚F (-5˚C) and lower.
During the defrost sequence, its mechanism uses a
motorized damper to temporarily block the incoming fresh
air stream allowing the warm air from the home to circulate
through the HRV. The exhaust blower shuts down & the
supply blower switches into high speed to maximize the
effectiveness of the defrost strategy.
motorized damper to temporarily block the incoming fresh
air stream allowing the warm air from the home to circulate
through the HRV. The exhaust blower shuts down & the
supply blower switches into high speed to maximize the
effectiveness of the defrost strategy.
The unit then returns to normal operation for 25 minutes,
and continues cycle.
and continues cycle.
SERVICEABILITY Core, filters, motors and drain pan can be
easily serviced through latched access door. Core
conveniently slides out with ease on an improved railing
system. Electrical box, placed on the outside of the unit,
can also be easily accessed.
easily serviced through latched access door. Core
conveniently slides out with ease on an improved railing
system. Electrical box, placed on the outside of the unit,
can also be easily accessed.
* For details concerning warranties, please visit your local dealer.
The product is manufactured by Fantech, Inc. Fantech reserves the right to modify, at any time and without notice, any or all of this product's features, designs, components and specifications.