Xerox 50 Benutzerhandbuch
DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE 4–13
MAINTENANCE
1
2
4
5
6
7
4
4
Grasp the Developer Waste Container with your
right hand. Pull the Developer Waste Container
completely out of the copier/printer, as illustrated
in Figure 19.
right hand. Pull the Developer Waste Container
completely out of the copier/printer, as illustrated
in Figure 19.
5
Remove the gold cap from the front of the used
Developer Waste Container, as illustrated in
Figure 20.
Developer Waste Container, as illustrated in
Figure 20.
6
Securely push the gold cap over the opening on
the back of the waste container, as illustrated in
Figure 21, to prevent developer beads from
spilling out.
the back of the waste container, as illustrated in
Figure 21, to prevent developer beads from
spilling out.
Figure 19: Removing the old
Developer Waste Container
Figure 20: Removing the cap
Figure 21: Placing the cap on
the waste container