Frigidaire GLHV36T5KC Benutzerhandbuch

Be sure lights are cool before cleaning the hood.

To Clean Filters

•

••

•

• The metal grease filters will last forever.

They are made of anodized aluminum

•

••

•

• It is recommended that the filters be washed at least once a month; they

can be washed by hand or in the dishwasher.

• Drain water through edge holes and let each filter dry thoroughly before

replacing it.

To Remove The Metal Grease Filters

• Turn blower and lights off.
• Push simultaneously the two handles S first upwards, then towards the

center and extract the filters Figure 10.

To Replace The Metal Grease Filters

• Reverse procedure.

To Replace The Carbon Filter

• The Carbon Filter must be replaced once a yera in normal use.
• To dismount push the two locks D and extract it from its housing.

To Clean Hood Surface

• For general care, wipe the outside of the stainless steel, white, black or

glass hood with sudsy water or household cleaners such as Fantastic® or
Formula 409

, rinse well and dry with clean soft cloth to avoid water marks.

• Wipe and dry brushed stainless steel in the same direction as the grain.
• Do not use abrasive products.
• To remove finger prints and give added shine use spray cleaners such as

Stainless Steel Magic

and Shimmer

Hood Cleaning

NOTE: Turn blower and lights off. Make sure the lights are cool.

Turn blower and lights off. Make sure the lights are cool.

Turn blower and lights off. Make sure the lights are cool. If new

lights do not operate be sure lights are inserted correctly before calling
service.

• Remove the light shield Q

Q by pushing simultaneously the two unlocking

buttons R

R (Figure 12); for safety reasons make sure to remove the light

shield from its suspension slides G

• Pull out fluorescent tube and replace with Philips Type PL-S 9 Watt

maximum.

• Refit the light shield.

Lights replacement

Figure 10

Figure 12

Figure 11