Greenheck Fan 747680 Benutzerhandbuch

Model SP is a direct drive ceiling exhaust fan designed 
for clean air applications where low sound levels are 
required. Many options and accessories are available 
such as lights, motion detectors, ceiling radiation 
dampers and speed controls. Capacities range from 25 
to 1,600 cfm (42 to 2,718 m

3

/hr) and 1 in. wg (248 Pa). 

AMCA Licensed for Sound and Air Performance.

ENERGY STAR

®

 Certified models include: 

SP-A, 50, 70, 90, 200, 250, 290 and 410; 
SP-B, 50, 70, 80 and 90.

Model CSP is a direct drive inline exhaust fan designed 
for clean air applications where low sound levels are 
required. Capacities range from 70 to 3,800 cfm (119 to 
6,456 m

3

/hr) and 1 in. wg (248 Pa). AMCA Licensed for 

Air Performance.

• Suitable for use with solid state speed controls.

• Use this unit only in the manner intended by the manufacturer. 

If you have questions, contact the manufacturer.

•  Before servicing or cleaning unit, switch power off at service 

panel and lock service disconnecting means to prevent 
power from being switched on accidentally. When the service 
disconnecting means cannot be locked, securely fasten a 
prominent warning device, such as a tag, to the service panel.

• Installation work and electrical wiring must be done by 

qualified person(s) in accordance with all applicable codes 
and standards, including fire-rated construction.

• Sufficient air is needed for proper combustion and exhausting 

of gases through the flue (chimney) of fuel burning equipment 
to prevent back drafting. Follow the heating equipment 
manufacturer’s guideline and safety standards such as 
those published by the National Fire Protection Association 
(NFPA), and the American Society for Heating, Refrigeration 
and Air Conditioning Engineers (ASHRAE) and the local code 
authorities.

• When cutting or drilling into wall or ceiling, do not damage 

electrical wiring or other hidden utilities.

• Acceptable for use over a bathtub or shower when installed  

in a GFCI protected branch circuit. (Up through size SP-A390)

• Never place a switch where it can be reached from a tub or 

shower.

• Ducted fans must always be vented to the outdoors.

• These fans are not recommended for cooking exhaust 

applications. They are designed primarily for low temperature, 
clean air applications only. The diagram shows the minimum 
distance these fans should be placed in relation to cooking 
equipment.

• Fan/Light combination not to be installed in a ceiling thermally 

insulated to a value greater than R40.

• For general ventilating use only. Do not use to exhaust 

hazardous or explosive materials and vapors.

®