HP (Hewlett-Packard) 4100N Benutzerhandbuch

36 Chapter 1 - Printer basics

EN

Network administrators: If the printer is attached to a network 
through an HP JetDirect EIO card, the printer must be configured for 
that network before you can print. For Microsoft and Novell NetWare 
networks, you can use the printer installation software. For other 
options, refer to the HP JetDirect Print Server Administrator’s Guide 
(included with printers that contain an HP JetDirect print server).

Use the Customization Utility option to create a set of disks with the 
exact software you want the end users to use. This allows you to 
distribute drivers without distributing administration software to end 
users.

To configure the driver, access it in one of the following ways:

Settings in the printer driver and software application override control 
panel settings. (Software application settings override printer driver 
settings.)

Windows 9x

From the File menu, click Print, and 
then click Properties. (The actual 
steps can vary; this is the most 
common method.)

Click the Start button, point to 
Settings, and then click Printers. 
Right-click the printer icon, and 
choose Properties.

Windows NT 4.0

From the File menu, click Print, and 
then click Properties. (The actual 
steps can vary; this is the most 
common method.)

Click the Start button, point to 
Settings, and then click Printers. 
Right-click and choose Document 
Defaults or Properties.

Windows 2000

From the File menu, click Print, and 
then click Properties. (The actual 
steps can vary; this is the most 
common method.)

Click the Start button, point to 
Settings, and then click Printers. 
Right-click and choose Printing 
Preferences or Properties.

Windows 3.1x and 
Windows NT 3.51

From the File menu, click Print, click 
Printers, and then click Options. 
(The actual steps can vary; this is the 
most common method.)

From the Windows control panel, 
double-click Printers, highlight the 
printer, and click Setup.