Renesas H8/330 Benutzerhandbuch

Section 5   Notice 

1.  Make sure that pin 1 on the user system IC socket is correctly aligned with pin 1 on the cable 

head before inserting the cable head into the user system IC socket. 

2.  The dimensions of the recommended mount pad for the user system IC socket are different 

from those of the MCU.   

3.  This user system interface cable is specifically designed for the HS3008EPI60H emulator.  Do 

not use this cable with any other emulator station.   

4.  To prevent breaking of wires in the cable body, do not place heavy or sharp metal objects on 

the user system interface cable. 

5.  While the emulator station is connected to the user system with the user system interface 

cable, force must not be applied to the cable head.  Place the emulator station, user system 
interface cable, and user system as shown in the example in figure 10. 

 

User system

Cable

Emulator station

Place components so that the cable body and cable head are 
parallel to the user system.

Cable head is parallel 

to emulator station

Cable head is parallel 

to user system

6.  The P1 short connector is used for testing.  Do not remove the short pins that are inserted in 

the sides of pin 1 and pin 2. 

P1

1

3

 

15