Samsung RSG5 Benutzerhandbuch
1_
setting up
Removing the freezer door
A few things to mention first.
• Make sure that you lift the door straight up so the hinges are not bent or broken.
• Be careful not to pinch the water tubing and wire harness on the door.
• Place doors on a protected surface to prevent scratching or damage.
• Make sure that you lift the door straight up so the hinges are not bent or broken.
• Be careful not to pinch the water tubing and wire harness on the door.
• Place doors on a protected surface to prevent scratching or damage.
1. With the Freezer door closed, remove the upper hinge cover
1
using a screwdriver, and
then disconnect the wires by gently pulling them apart
.
. Remove hinge screws
and the ground screw
by turning counter-clockwise, and take
off the upper hinge
. Be careful that the door does not fall on you as you are removing it
. Next, remove the door from the lower hinge
by carefully lifting the door straight up
.
. Remove the lower hinge
from the bracket
by
gently lifting the lower hinge upwards.
Reattaching the freezer doors
To reattach the freezer doors, assemble parts in reverse order
1
Be careful not to pinch
the water tubing and
wire harness on the
door.
the water tubing and
wire harness on the
door.
Be careful not to miss
the parts of refrigerator.
the parts of refrigerator.
DA99-01745A(EN)-GGH-0.3.indd 12
2008.8.20 8:41:55 PM