Inglis Home Appliances 2225407 Benutzerhandbuch

Remove 

⁵⁄₁₆ in. hex-head hinge screws from handle side and 

move them to opposite side (see Graphic 1-1).

Remove cabinet hinge hole plugs from cabinet top and move 
them to opposite side hinge holes as shown (see Graphic 
1-2).

Remove freezer handle assembly as shown. Keep all parts 
together (see Graphic 2).

Remove door hinge hole plug. Move to opposite side as 
shown (see Graphic 3).

Remove door handle sealing screws. Move to opposite side 
of freezer door as shown (see Graphic 4).

Remove door stop. Move to opposite side of freezer door as 
shown (see Graphic 5). 

Position freezer handle on opposite side of freezer door. 
Assemble handles on door as shown (see Graphic 2).

Tighten all screws. Set aside door until hinges and refrigerator 
compartment door are in place.

Remove refrigerator handle bottom trim. For Style 1, remove 
the handle screw cover (see Graphic 6-1). For Style 2, slide 
trim down as shown (see Graphic 6-2).

Remove refrigerator handle assembly as shown. Keep all 
parts together (see Graphic 6-3).

Remove door hinge hole plug from refrigerator door. Move to 
opposite side hinge hole as shown (see Graphic 3).

Remove door handle sealing screws. Move to opposite side 
of refrigerator door as shown (see Graphic 4).

Remove door handle seal screw front. Move to opposite side 
of refrigerator door as shown (see Graphic 7).

Remove door stop. Move to opposite side of refrigerator door 
as shown (see Graphic 5). 

Position refrigerator handle on opposite side of the 
refrigerator door as shown (see Graphic 6-3). Drive top two 
screws in handle first. Align lower portion of handle and drive 
bottom screw.

Align refrigerator bottom trim. For Style 1, replace the door 
handle screw cover (see Graphic 6-1). For Style 2, slide trim 
into place (see Graphic 6-2).

Tighten all screws. Set aside refrigerator door until bottom 
hinge is installed on product.

 Graphic may be reversed if door swing is reversed.

Replace the parts for the bottom hinge as shown. Tighten 
screws. Replace the refrigerator door.

 Provide additional support for the doors while the 

hinges are being moved. Do not depend on the door magnets 
to hold the doors in place while you are working.

Assemble the parts for the center hinge as shown and tighten 
all screws (see Center Hinge graphic). Replace the freezer 
door.

Assemble the parts of the top hinge as shown (see Top Hinge 
graphic). Do not tighten screws completely. 

Line up the doors so that the bottom of the freezer door 
aligns evenly with the top of the refrigerator door. Tighten all 
screws.

Check all holes to make sure that hole plugs and screws are 
in place. Reinstall top hinge cover (see Top Hinge graphic).

Replace the base grille (see Base Grille graphic).

Plug in refrigerator or reconnect power.

Reset the controls (see “Using the Control(s)” section).

Return all removable door parts to doors and food to product.

Door Stop Screw

Door Hinge Hole Plug

Door Handle Sealing Screw 

Cabinet Hinge Hole Plug

Flat-Head Handle Screw           Door Handle Screw Cover

Door Handle Seal Screw Front

 Round-Head Handle Screw