WhisperKool XLT 3000 Benutzerhandbuch

Page 18

XLT 020111

A WhisperKOOL XLT ducting kit is available for purchase. The kit allows the warm air to exhaust to several places such 

as an attic, an adjacent room, or outside. The goal is to get the warm exhaust air away from the rear intake of the unit. 

The customer will need to purchase 8” flex ducting, along with any hangers needed to run the ducting outside. 

See page 29 for more information on purchasing a XLT ducting kit.

The in-line fan will turn on and push warm exhaust air away from the WhisperKOOL® unit, preventing 

the  unit  from  overheating. The  in-line  fan  is  capable  of  moving  warm  air  through  25  feet  of  8”  flex 

ducting (not included). The in-line fan can be set to automatically turn on at varying temperatures in 

order to conserve the most electricity.

Setting  the  Thermostat  Controller  to  its  lowest  setting  will  turn  the  fan  on  at  lower  temperatures 

(Around 70° F). Setting the Thermostat Controller to its highest setting will turn the fan on at higher 

temperatures (Around 100° F). If the unit isn’t cooling properly, setting the thermostat controller to a 

lower setting may fix the problem.