Viking AF/AR Benutzerhandbuch
52
Service & Registration
Service & Parts
Only authorized replacement parts may be
used in performing service on the appliance.
Do not repair or replace any part of the
appliance unless specifically recommended in
the manual. All other servicing should be
referred to a qualified technician.
used in performing service on the appliance.
Do not repair or replace any part of the
appliance unless specifically recommended in
the manual. All other servicing should be
referred to a qualified technician.
Record the following information indicated
below. You will need it if service is ever required.
The serial number and model number for your
appliance are located on the identification plate
mounted behind the top light.
below. You will need it if service is ever required.
The serial number and model number for your
appliance are located on the identification plate
mounted behind the top light.
Model Number
_________________________________________
Serial Number
_________________________________________
Date of Purchase
_________________________________________
Date Installed
_________________________________________
Dealer's Name
_________________________________________
Address
_________________________________________
Verify Operations
51
Control Panels
1. Press “Display On” or “Activate Controls” pad
2. Verify unit is not in Sabbath Mode
2. Verify unit is not in Sabbath Mode
If in Sabbath Mode:
A. The Sabbath Mode will disable the interior lights, display (except 3 blue squares) and alarm. (See
A. The Sabbath Mode will disable the interior lights, display (except 3 blue squares) and alarm. (See
picture below for visual indication of Sabbath Mode)
To exit the Sabbath Mode:
B. Press & Hold “Display On” or “Activate Controls” and then “Display Off” for 3 seconds. (The
B. Press & Hold “Display On” or “Activate Controls” and then “Display Off” for 3 seconds. (The
control will beep 3 times to alert the user the Sabbath Mode has been exited)
3. Verify unit is not in Showroom Mode
If in Showroom Mode:
A. The Showroom Mode will disable the refrigerator system but all other functions are normal. These
A. The Showroom Mode will disable the refrigerator system but all other functions are normal. These
include lights and control. (See picture below for visual indication of Showroom Mode)
To exit Showroom Mode:
B. Press & Hold “Display On” or “Activate Controls”; while holding, press and hold “Higher Temp”
B. Press & Hold “Display On” or “Activate Controls”; while holding, press and hold “Higher Temp”
and “Alarm Off” together. (The control will beep 3 times to alert the user that Showroom Mode
has been exited)
has been exited)
4. Press “Max Frz” & “Display Off” at the same time and hold until beeps (force start compressor).
5. All models need to be set at the 5th bar for Refrigerator & Freezer - factory setting.
5. All models need to be set at the 5th bar for Refrigerator & Freezer - factory setting.
ACTIVATE
CONTROLS
REF
TEMP
HIGHER
TEMP
LOWER
TEMP
HIDDEN
BUTTON
BUTTON
HIDDEN
BUTTON
BUTTON
MAX FRZ
MAX
REF
ALARM
OFF
DISPLAY
OFF
FRZ
TEMP
HIGH
TEMP
TEMP
MAX
REF
COLDEST
. . . . . . . . . . . . . .
DOOR OPEN
All Refrigerator
FRZ
TEMP
FRZ
TEMP
HIGH
TEMP
TEMP
MAX
REF
MAX
FRZ
COLDEST
. . . . . . . . . . .
DOOR OPEN
ACTIVATE
CONTROLS
FRZ
TEMP
HIGHER
TEMP
LOWER
TEMP
HIDDEN
BUTTON
BUTTON
HIDDEN
BUTTON
BUTTON
MAX REF
MAX
FRZ
ALARM
OFF
DISPLAY
OFF
FRZ
TEMP
HIGH
TEMP
TEMP
MAX
REF
COLDEST
. . . . . . . . . . . . . .
DOOR OPEN
All Freezer
FRZ
TEMP
FRZ
TEMP
HIGH
TEMP
TEMP
MAX
REF
MAX
FRZ
COLDEST
. . . . . . . . . . .
DOOR OPEN