CyberPower Systems OL6KRT2UTF Benutzerhandbuch

 

Copyright © 2011 CyberPower Systems, Inc.

 

 

 

These versatile Step-Down Transformers can be mounted in a rackmount 
or vertical tower orientation. This versatility is especially important to 
growing organizations with changing needs that value having the option 
to position a Step-Down Transformer on a floor or in a rackmount system. 
Please follow the instructions below for the respective mounting methods.

 

 

To prevent the risk of fire or electric shock, only use the 

supplied hardware to attach the mounting brackets.

 

 

Attach the two rackmount ears to the Step-Down Transformer using the 
provided screws M5X8L*8pcs. 

 

The rails adjust to mount in 48-cm (19-inch) panel racks from 52 to 
91.5cm (20.5 to 36 inches) deep. Select the proper holes in the rack for 
positioning the Step-Down Transformer in the rack. The 2U Step-Down 
Transformer takes up position 1 through position 6. The 3U Step-Down 
Transformer takes up position 1 through position 9.

 

 

Attach the rackmount rail to your rack with two M5X12L screws and two 
plastic washers at the front of the rack. (Located in position 1 & position 6) 
Do not tighten the screws. Adjust the rail size on the rail assembly of your 
rack. Secure the rail to the rear of the rack with two M5X12L screws and 
two plastic washers. Tighten all screws at the front and rear of the rail. 

Place the Step-Down Transformer on a flat stable surface with the front of 
the unit facing toward you. Secure the Step-Down Transformer to your 
rack with four M5X12L screws at the front of the rack. The 2U Step-Down 
Transformer takes up position 2 through position 5. The 3U Step-Down 
Transformer takes up position 2 through position 8.

 

 

The Step-Down Transformer must be installed above the 

power module.

 

 

2