Samsung 203B Benutzerhandbuch

10 Operating Instructions and Installation

10-2

1. POWER S/W : Switch the monitor on and off. 

2. POWER IN : Power cord, plugs into monitor and wall 

receptacle.

10-2 Rear

Activates a highlighted menu item. / 

Push the 'SOURCE', then selects the video signal

while the OSD is off. (When the source button is

pressed to change the input mode, a message

appears in the left upper side of the screen 

displaying the current mode -- analog or digital

input signal.)

Note : If you select the digital mode, you must con-

nect your monitor to the graphic card's port using

the DVI cable.

When the 'AUTO' button is pressed, the Auto

Adjustment screen appears as shown in the ani-

mated screen on the center. Auto adjustment

allows the monitor to self-adjust to the incoming

video signal. The values of fine, coarse and posi-

tion are adjusted automatically. (Available in ana-

log mode only) 

Use this button for turn the monitor on and off.  

(The configuration at the back of the monitor may vary from product to product.)