Blomberg KGM 9550P Benutzerhandbuch

EN

13

Before you start using the fridge/
freezer check that:

1. The feet have been adjusted for 
perfect levelling.
2. The interior is dry and air can 
circulate freely at the rear of the 
cabinet.
3. Clean the interior as recommended 
under “CLEANING AND CARE.”
4. Insert the plug into the wall socket 
and switch on the electricity supply.
• When the door is open the fridge 
interior light will come on.
5. You will hear a noise as the 
compressor starts up. The liquid and 
gases sealed within the refrigeration 
system may also give rise to noise, 
whether the compressor is running or 
not which is quite normal.
“Due to operation of the fan inside 
the frost free freezer compartment, 
overall noise level is slightly higher 
in comparison to non-frost free 
appliances. This is quite normal and is 
not a fault.”
6. Set the setting knob half way 
between min and max.
7. Front edges of the cabinet may feel 
warm. This is normal. These areas 
are designed to be warm to avoid 
condensation.

8. “Do not load the appliance 
immediately it is switched on. Wait 
until the correct storage temperature 
has been reached. We recommend 
that you check the temperature 
with an accurate thermometer (see; 
Temperature Control and Adjustment)”
9. When the freezer reaches the 
desired temperature the freezer fan will 
stop. When the freezer fan is on, the 
noise will be louder when the freezer 
door is opened.
10. Avoid spillage of food particularly 
small items like rice, peas, beans 
through the fan guard as they may 
cause the cooling system to block and 
therefore operate less efficiently.