Blomberg IWD 1006 XT Benutzerhandbuch

EN

12

unscrewing its screws as shown in the 
figure below. (See Figure B)
2. Loosen the three screws of the hinges 
of the lower door, which you wish to 
escalate, with the help of a screwdriver 
as shown in the figure below. (Do not 
remove completely) 
(See Figure C) 
• If the freezer compartment door is 
lower than the fridge compartment door, 
bring them to the same level by turning 
the turning the elevation screw on the 
freezer compartment side in the direction 
of arrow using a M6 Allen wrench as 
illustrated in Figure D.

• If the freezer compartment door is 
higher than the fridge compartment 
door, bring them to the same level 
by turning the elevation screw on the 
freezer compartment side in the reverse 
direction of arrow using a M6 Allen 
wrench as illustrated in Figure D.
After bringing the doors to the same level 
by elevating the front part with the aid of 
the elevation screws,ensure the doors of 
the refrigerator shall close properly. If the 
doors do not close properly, this might 
adversely affect the efficiency of the 
refrigerator.