Amana W103209878 Benutzerhandbuch

Seite von 12
5
COOKTOP USE
The control knobs can be set to anywhere between HI and LO. 
Push in and turn to setting.
Ceramic Glass (on some models)
The surface cooking area will glow red when an element is on. It 
may cycle on and off to maintain the selected heat level.
Use cookware about the same size as the surface cooking area. 
Cookware should not extend more than ½" (1.3 cm) outside the 
area.
Cleaning off the cooktop before and after each use will help keep it 
free from stains and provide the most even heating.
Cooktop On Indicator Light (on some models)
The Cooktop On indicator light is located on the console panel. 
When any control knob on the console panel is turned on, the 
Cooktop On indicator light will glow.
Hot Surface Indicator Light  (on some models)
On ceramic glass models, the hot surface indicator light is located 
on the console panel.
The hot surface indicator light will glow as long as any surface 
cooking area is too hot to touch, even after the surface cooking 
area is turned off.
Coil Elements and Burner Bowls (on some models)
Coil elements should be level for optimal cooking results. Burner 
bowls, when clean, reflect heat back to the cooktop. They also help 
catch spills.
Cookware should not extend move than ½" (1.3 cm) over the coil 
element. If cookware is uneven or too large, it can produce excess 
heat, causing the burner bowl to change color.
Dual Cooking Zone (on some models)
The Dual Cooking Zone offers flexibility depending on the size of 
the cookware. Single size can be used in the same way as a regular 
element. The dual size combines both the single and outer element 
and is recommended for larger size cookware.
OVEN USE
Odors and smoke are normal when the oven is used the first few 
times, or when it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive to the 
fumes given off. Exposure to the fumes may result in death to 
certain birds. Always move birds to another closed and well-
ventilated room.
Electronic Oven Controls
Control Display
The display will flash when powered up or after a power loss. Press 
CANCEL/OFF to clear. When oven is not in use, the time of day is 
displayed. Indicator lights show functions that are in use.
WARM
Hold warm
Food must be at serving temperature before placing it in the warmed oven.
1. Press WARM.
2. Temperature is set at 170°F (75°C) for 60 minutes (1.00 hour).
3. Press START. 
4. Press CANCEL/OFF when finished.
COOK TIME
(on some 
models)
Timed cooking
Timed Cooking allows the oven to be set to turn on at a certain time of day, cook for a set length 
of time, and/or shut off automatically. Delay start should not be used for foods such as breads 
and cakes because they may not bake properly.
To set a Timed Cook or a Delayed Timed Cook see “Timed Cooking” section.
START TIME
Delayed start
The Start Time keypad is used to enter the starting time for an oven function with a delayed start.
START
Cooking start
The Start pad begins any oven function. If Start is not pressed within 5 seconds, “PUSH?” or 
“PSH” appears in the display. If Start is not pressed within 1 minute after pressing a keypad, the 
function is canceled and the time of day is displayed.
CANCEL/OFF
Range function
The Cancel/Off keypad stops any function except the Clock, Timer, and Oven Control Lockout.
TEMP/HOUR
Temperature and 
time adjust
The “More” or “Less” arrow pads are used to adjust time and temperature settings.
KEYPAD
FEATURE
INSTRUCTIONS
WARNING
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
REMEMBER: When range is in use or (on some models) 
during the Self-Cleaning cycle, the entire cooktop area may 
become hot.
A. Dual
B. Single
A
B