Amana ART6710 Benutzerhandbuch

5

Remove protective packing materials from range. Tape
residue can be cleaned with a soft cloth and alcohol.

Underwriter’s Laboratories, Inc. specifies range can be
installed flush against right and left base cabinets, and
rear vertical wall. Range can also be installed flush
against left or right vertical wall extending above 36 inch
standard countertop height.

To avoid risk of burns or fire by reaching over elements,
cabinet storage space located above range should be
avoided.

Range should extend approximately 2 inches from
cabinet front to oven door handle. Using dimensions,
prepare cabinet opening. 

(Figure 1)

Range Dimensions:
Width—30 inches
Depth—25½ inches (Rear stand-offs to side panel front)
Height—36 inches

Standard cabinet and countertop height

A

C

B

D

A—30

1

/

8

 to 30¼ inches

B—36 inches standard
C—35 inches standard
D—23 inches standard

Figure 1

Using dimensions, prepare cabinet opening. 

(Figure 2)

• Minimum clearance to rear wall is 0 inches.
• Minimum clearance to a vertical right or left side wall is

0 inches.

• Minimum clearance to countertop/cabinet on each side

is 0 inches.

• Minimum of 30 inches between top of cooking surface

and bottom of an unprotected wood or metal cabinet.

• Minimum of 24 inches between cooking surface and

protected wood or metal cabinet above range. Cabinet
bottom must be protected by at least ¼ inch thick
millboard with not less than No. 28 MSG sheet steel,
.015 inch thick stainless steel, .024 inch thick
aluminum, or .020 inch thick copper.

A

B

C

D

E

A—30 inches minimum
B—30 inches unprotected/24 inches protected

minimum

C—13 inches maximum
D—25 inches maximum
E—36 inches maximum

Figure 2