Bertazzoni A304GGVXE Benutzerhandbuch

 

10

The backguard must be installed prior to 
operation of the appliance for appropriate 
ventilation of the oven compartment.  

The supplied backguard is a 2‐part assembly. The 
box also contains a set of metal screws for 
securing the backguard to the worktop. 

 

Disassemble the backguard and position the front 
part on the worktop. Align the screw holes with 
the corresponding holes at the back of the 
worktop. 

 

 

If the holes are not aligned, partially loosen the 
brackets att the back of the worktop as shown 
below.

  

 

Install the front part of the backguard by 
tightening the 2 central screws from the top and 

2 lateral screws from the bottom.

 

 

 

 

Position the back part of the backguard and 
secure it to the worktop tightening 4 screws from 
the bottom. 

 

 

 

Connect the back and front part of the upstand. 
Check for tight assembly.