GE JBP69BD Merkblatt

*Dimension from wall to front of closed door handle is 27-3/4”.

30

25

2-1/2

7-1/2

29-7/8

25-3/8*

47-5/8

44-7/16

2-1/2

Acceptable electrical

outlet area

Preferred electrical

outlet area

Roughed-in dimensions

Listed by
Underwriters
Laboratories

All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation 
of the range.

For answers to your Monogram,

® 

GE Profile

™

or 

GE appliance questions, visit our website at
GEAppliances.com or call 
GE Answer Center

®

service, 800.626.2000.

†

Note: Check local codes for required breaker size.

A properly grounded branch circuit with a 3 prong grounding type receptacle is required for 
GE ranges.

Receptacle Locations
Locally approved flexible service cord or conduit must be used because terminals are not 
accessible after range installation. See shaded area in drawing for location of electrical outlet box.
Recommended outlet locations allow range to be installed directly against wall.

Note:  Conforms to U.L. requirements for 0" spacing for adjacent walls below countertops. To
reduce possibility of scorching of walls, it is recommended a minimum of 1-1/2" spacing be
allowed from adjacent side walls to allow for possible extended, high-heat, no-load heating ele-
ment operation.

Installation Information: Before installing, consult installation instructions packed with product
for current dimensional data.

10.5

7.9

40 Amps

†