Estate TGP300T Merkblatt

TGP300T

Gas supply: Use 3/4" (1.9 cm) rigid pipe gas
supply line to the range location. A smaller size
pipe on longer runs may result in insufficient 
gas supply. With L.P. gas, piping or tubing size 
can be 1/2" (1.3 cm) minimum. If local codes
permit, it is recommended that new flexible metal
appliance connector, design-certified by CSA, 
4-5 feet (122-152.4 cm) long, 1/2" (1.3 cm) or 
3/4" (1.9 cm) I.D., be used for connecting the
range to the rigid gas supply line. A 1/2" (1.3 cm)
male pipe thread is needed for connection to
pressure regulator female pipe threads. An
individual manual shutoff valve must be located 
in the same room, but external to the range.

Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only.  For complete details, see Installation
Instructions packed with product.  Specifications subject to change without notice.

Ref. W10121806

10-25-07

Cabinet opening dimensions shown
are for 25" (64 cm) countertop depth,
24" (61 cm) base cabinet depth and
36" (91.4 cm) countertop height.

If the cabinet depth is greater than 
24" (61 cm), the oven frame must
extend beyond cabinet fronts by 
1/2" (13 mm) minimum.

29-7/8" (75.9 cm)

width

42" 

(106.7 cm)

overall

height 

24-1/4"

(61.6 cm)

36" 

(91.4 cm)

cooktop

height

26-3/4"

(67.9 cm)

depth with

handle

For minimum
clearance to
top of cooktop,
see NOTE.

This shaded area

recommended for

installation 

of gas pipe.

This shaded area

recommended for

electrical outlet.

18" (45.7 cm)
min. clearance
upper side
cabinet to
countertop

13" (33.0 cm) max.
upper cabinet depth

30-

¹₈" (76.5 cm)

opening width

30" (76.2 cm) min.
cabinet opening width

8" 

(20.3 cm)

2" 

(5.1 cm)

3" 

(7.6 cm)

5"

(12.7 cm)

5"

(12.7 cm)

10" (25.4 cm)

2" (5.1 cm) min.
countertop space to
side wall or other
combustible material

24" 

(61.0 cm)

NOTE: 24" (61 cm) minimum when bottom of 
wood or metal cabinet is protected by not less 
than 1/4" (0.64 cm) flame retardant millboard
covered with not less than No. 28 MSG sheet steel,
0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm)
aluminum or 0.020" (0.5 mm) copper.

30" (76.2 cm) minimum clearance between the top
of the cooking platform and the bottom of an
unprotected wood or metal cabinet.

If installing a range hood or microwave hood
combination above the range, follow the range
hood or microwave hood combination installation
instructions for dimensional clearances above the
cooktop surface.