Frigidaire 318205258 Benutzerhandbuch

18

The TIMER pad controls the Continuous Bake or 12 Hour 

Energy Saving features. The oven control has a factory 

preset built-in 12 Hour Energy Saving feature that will 

shut off the oven if the oven control is left on for more 

than 12 hours. The oven can be programmed to override 

this feature for Continuous Baking.
To set the control for Continuous Bake or 12 Hour 

Energy Saving features
1.  Press and hold TIMER for 6 seconds.
 

After 6 seconds "12hr" or "--h" will appear in the 

display and the control will beep once.

2. Press   or 

 pad to switch between the 6 Hour 

Energy Saving and continuous bake features.

Note: "12hr" in the display indicates the control is set for 

the 12 Hour Energy Saving mode and "- -h" indicates 

the control is set for the Continuous Bake feature.

3.  Wait 4 seconds to accept the change (display will 

return to time of day) or press CANCEL pad to reject 

the change.

The BROIL pad controls the Fahrenheit or Celsius 

temperature display modes. The oven control can be 

programmed to display temperatures in Fahrenheit or 

Celsius. The oven has been preset at the factory to 

display in Fahrenheit.
To change display from Fahrenheit to Celsius or 

Celsius to Fahrenheit
1. Press 

BROIL pad and hold for 6 seconds. A beep 

will sound, "---" will appear and "BROIL" will fl ash 

in the display. After 6 seconds a beep will be heard 

and "F" or "C" will appear in the display. If "F" 

appears, the display is set to show temperatures in 

Fahrenheit. If "C" appears, the display is set to show 

temperatures in Celsius.

2. Press   or 

 pad to switch between Fahrenheit or 

Celsius display modes. The display will show either 
"F" or "C".

3.  Wait 4 seconds to accept the change or press 

CANCEL pad to reject the change.

The SET CLOCK pad is used to set the clock. The clock 

may be set for 12 or 24 hour time of day operation. 

The clock has been preset at the factory for the 12 hour 

operation. When the range is fi rst plugged in, or when 

the power supply to the range has been interrupted, the 

timer in the display will fl ash.
To set the clock (example below for 1:30)
1. Press 

SET CLOCK. "CLO" will appear in the display.

2. Press   or 

 pad to set the correct time of day. 

Wait 5 seconds to accept the change or press the 

CANCEL pad to reject the change. The new time of 

day will appear in the display.

1.  Press and hold SET CLOCK for 6 seconds. "CLO" will 

appear in the display.

2.  CONTINUE holding the pad until "12h" or "24h" 

appears in the display and the control beeps once.

3. Press   or 

 pad to switch between the 12 and 24 

hour time of day display. The display will show either 
"12h" or "24h".

4.  Wait 5 seconds to accept the change or press 

CANCEL pad to reject the change.

5.  Reset the correct time as described in To set the 

Clock above. Please note that if the 24 hour time 

of day mode was chosen, the clock will now display 

time from 0:00 through 23:59 hours.