Frigidaire FFEF4017LB Benutzerhandbuch

26

Most oven 

doors contain glass that can break. 

Read the following recommendations:

1.  Do not close the oven door until all the oven racks are 

fully in place.

2.  Do not hit the glass with pots, pans, or any other ob-

ject.

3.  Scratching, hitting, jarring or stressing the glass may 

weaken its structure causing an increased risk of 

breakage at a later time.

Oven door

Around

Hinge

The door is heavy. For safe, temporary storage, lay the 

door fl at with the inside of the door facing down.

The door is heavy. For safe, temporary storage, lay the 

door fl at with the inside of the door facing down.

1.  Open oven door completely (horizontal with fl oor - 

See Figure 1).

2.  Pull the door hinge locks on both left and right 

door hinges down from the oven frame completely 

towards the oven door (See Figure 2). A tool such as 

a small fl at-blade screwdriver may be required.

3.  Firmly grasp both sides of oven door along the door 

sides (Do not use the oven door handle - See Figure 3).

4.  Close the door to the broil stop position (the oven door 

will stop into this position just before fully closing).

5.  With the oven door in the broil stop position, lift the 

oven door hinge arms over the roller pins located on 

each side of the oven frame (See Figure 4).

1.  Firmly grasp both sides of oven door along the door 

sides (Do not use the oven door handle - See Figure 3).

2.  Holding the oven door at the same angle as the 

removal position, seat the hook of the hinge arm over 

the roller pins located on each side of the oven door 

frame (See Figure 4). The hook of the hinge arms 

must be fully seated onto the roller pins.

3.  Fully open the oven door (horizontal with fl oor - See 

Figure 1).

4.  Push the door hinge locks up towards and into the 

oven frame on both left and right oven door hinges 

(See Figure 2) to the locked position.

5.  Close the oven door.

Door Hinge locations

with oven door fully open

1.  Open the door to the fully opened position.

2.  Pull up the lock located on both hinge supports and 

engage it in the hinge levers. You may have to apply a 

little downward pressure on the door to pull the locks 

fully over the hooks.

3.  Grab the door by the sides, pull  the bottom of the 

door up and toward you to disengage the hinge sup-

ports. Keep pulling the bottom of the door toward you 

while rotating the top of the door toward the range to 

completely disengage the hinge levers.

4.  To replace the door, reverse the door removal steps. 

Make sure the hinge supports are fully engaged before 

unlocking the hinge levers.