Frigidaire FPDS3085KF Benutzerhandbuch

9

Your built-in range is equipped with gas surface burners 

with different BTU ratings. The ability to heat food 

quicker and in larger volumes increases as the burner 

size increases.

The small SIMMER burner is best used for simmering 

delicate sauces, etc. This burner is located at the right 

rear burner position on the cooktop (see Figures 1 & 2).

The STANDARD burner can be used for most surface 

cooking needs. The standard burners are located at the 

left front position on the cooktop (see Figures 1 & 2).

The POWER  burners are best used for bringing large 

quantities of liquid rapidly up to temperature or when 

preparing larger quantities of food. The POWER burners 

are located at the right front and left rear burner 

positions on the cooktop (see Figures 1 & 2).

Regardless of size, always select cookware that is suitable 

for the amount and type of food being prepared. Select a 

burner and fl ame size appropriate to the pan. Never allow 

fl ames to extend beyond the outer edge of the pan.

Figure 1 - Model A

Figure 2 - Model B

It is very important to make sure that all of the Surface 

Burner Caps and Surface Burner Grates are installed 

correctly and at the correct locations.

1.  Remove all packing material from cooktop area.

2.  Discard all packing material (if applicable).

3.  Unpack Burner Grates and position on the cooktop.
REMEMBER — DO NOT ALLOW SPILLS, FOOD, 

TO ENTER THE GAS ORIFICE HOLDER OPENING. 

Always keep the Burner Caps and Burner Heads in place 

whenever the surface burners are in use.