Frigidaire FGEF304DKF Benutzerhandbuch

17

The TIMER and SELF CLEAN pads control the Continuous 

Bake or 6 Hour Energy Saving features. The oven control has 

a factory preset built-in 6 Hour Energy Saving feature that 

will shut off the oven if the oven control is left on for more 

than 6 hours. The oven can be programmed to override this 

feature for Continuous Baking.

1.  Press and hold TIMER for 6 seconds.

 

After 6 seconds “6Hr OFF” or “StAY On” will appear 

in the display and the control will beep once.

2. Press 

SELF CLEAN to switch between the 6 Hour Energy 

Saving and continuous bake features.

Note: “6Hr OFF” in the display indicates the control is set for 

the 6 Hour Energy Saving mode and “StAY On” indicates 

the control is set for the Continuous Bake feature.

3. Press 

START to accept the change (display will return to 

time of day) or press CANCEL to reject the change.

The BROIL and SELF CLEAN pads control the Fahrenheit 

or Celsius temperature display modes. The oven control can 

be programmed to display temperatures in Fahrenheit or 

Celsius. The oven has been preset at the factory to display 

in Fahrenheit.

1.  To tell if the display is set for Fahrenheit or Celsius press 

BROIL and hold it for 6 seconds; “550°” will appear 

and “BROIL” will fl ash in the display and a beep will 

sound. If “FAhrnht” appears, the display is set to show 

temperatures in Fahrenheit. If “CELSIUS” appears, the 

display is set to show temperatures in Celsius.

2. Press SELF CLEAN to switch between Fahrenheit or 

Celsius display modes. The display will show either 

“FAhrnht” or “CELSIUS”.

3. Press 

START to accept the change or press CANCEL

to reject the change.

The SET CLOCK pad is used to set the clock. The clock may 

be set for 12 or 24 hour time of day operation. The clock 

has been preset at the factory for the 12 hour operation. 

When the range is fi rst plugged in, or when the power 

supply to the range has been interrupted, the timer in the 

display will fl ash.
To set the clock (example below for 1:30)

1. Press 

SET CLOCK. “CLO” will appear in the display.

2. Press 

1 3 0 pads to set the time of day to 1:30. “CLO” 

will stay in the display.

3. Press 

START. “CLO” will disappear and the clock will 

start.

1.  Press and hold SET CLOCK for 6 seconds. “CLO” will 

appear in the display.

2.  CONTINUE holding the pad until “12Hr dAY” or “24Hr 

dAY”  appears in the display and the control beeps 

once.

3. Press 

SELF CLEAN to switch between the 12 and 24 

hour time of day display. The display will show either 

“12Hr dAY” or “24Hr dAY”.

4. Press 

START to accept the change or press CANCEL to 

reject the change.

5.  Reset the correct time as described in To set the Clock 

above. Please note that if the 24 hour time of day mode 

was chosen, the clock will now display time from 0:00 

through 23:59 hours.