Electrolux WIWRABQOOB Merkblatt

584130 (WIWRABQOOB) Full 

Surface Two Zone Induction

Range 19-11/16″, pass-through

open base, island,

2 side operation – 208 V

584131 (WIXRABQOOB) Full 

Surface Two Zone Induction

Range 19-11/16″, pass-through

open base, island,

2 side operation – 240 V

Unit to be Electrolux S90 Full Surface Two Zone Induction Range
on pass

-through open base. Electric characteristics to be ___ 208 V

or ___ 240 V three phase. Unit to be installed in central island type
installation with operations from both sides. Unit to have glass ce-
ramic cooking surface with 2 independently controlled 5 kW induc-
tion zones. Unit to feature large surface induction top with seamless
transition between individual heating zones. Body and open base
of unit entirely in 304 

stainless steel. Unit shall have heavy duty

304 

stainless steel internal frame with reinforcement on the top of

0.157

″ (4 mm). Extra strength work top in heavy duty 0.118″ (3 mm)

stainless steel. “Lasertec” connection system permits units to be
connected to each other creating a seamless work top.

Covered by Electrolux Platinum 

Star® Service Program two-year

parts and one-year labor warranty, installation start-up and perfor-
mance check-up after one year from installation.

-Through Open Base,

• Unit for island type installation with operations by chef from both sides

(nobs on both sides of the console).

• Glass ceramic cooking surface with 2 independently controlled induction

zones with a power of 5 kW per zone.

• The large surface induction top offers a substantial increase in pan or pot

capacity with a seamless transition between individual heating zones, ideal
for à la carte operation.

• Each cooking zone is composed of one induction coil.

• Almost the entire surface of the ceramic plate can be used without

“dead” spots.

• On indicating lamp for each zone located on control console.

• Fast deployment with full heating power immediately.

• Low heat dissipation to the kitchen.

• Power to the individual zones can be set with progressive output i.e. fine

regulation at the lower and larger progress at the upper levels.

• The smooth, glass ceramic plate is not directly heated, so there is no

burning on cooking surface.

• Heavy duty internal frame 304 type 

stainless steel with reinforcement on

top of 0.157

″ (4 mm).

• 0.118

″ (3 mm) top in 305 type stainless steel.

• “Lasertec connection system” creates seamless work top when units are

connected to each other.

• Unit delivered with four 7-7/8

″ (200 mm) legs as standard (all round

stainless steel kick plates as option).

• Set 4 

castors (2 with brake).

• Stainless steel 0.118

″ (3 mm) side panel.

• 5

″ (130 mm) portioning shelf.

• 7.8

″ (200 mm) portioning shelf.

• All round 

stainless steel kick plates.

• Scraper for induction ranges

.

-

-Through Open Base,