Electrolux 584132 Merkblatt

584132 (WIWWAFQQOB) Full 

Surface Four Zone Induction

Range, open base, c-board,
wall or back to back installation –
208 V

584133 (WIXWAFQQOB) Full 

Surface Four Zone Induction

Range, open base, c-board,
wall or back to back installation –
240 V

Unit to be Electrolux S90 Full Surface Four Zone Induction Range
on open base. Electric characteristics to be ___ 208 V or ___ 240 V
three phase. Unit to have glass ceramic cooking surface with 4
independently controlled 5 kW induction zones. Unit to feature large
surface induction top with seamless transition between individual
heating zones. Unit to have raised rear c-board for against the wall
or back to back unit installation. Body and open base of unit entirely
in 304 

stainless steel. Unit shall have heavy duty 304 stainless

steel internal frame with reinforcement on the top of  0.157

″ (4 mm).

Extra strength work top in heavy duty 0.118

″ (3 mm) stainless steel.

“Lasertec” connection system permits units to be connected to each
other creating a seamless work top.

Covered by Electrolux Platinum 

Star® Service Program two-year

parts and one-year labor warranty, installation start-up and perfor-
mance check-up after one year from installation.

• Glass ceramic cooking surface with 2 independently controlled induction

zones with a power of 5 kW per zone.

• The large surface induction top offers a substantial increase in pan or pot

capacity with a seamless transition between individual heating zones, ideal
for à la carte operation.

• Each cooking zone is composed of two induction coils.

• Almost the entire surface of the ceramic plate can be used without

“dead” spots.

• On indicating lamp for each zone located on control console.

• Fast deployment with full heating power immediately.

• Low heat dissipation to the kitchen.

• Power to the individual zones can be set with progressive output i.e. fine

regulation at the lower and larger progress at the upper levels.

• The smooth, glass ceramic plate is not directly heated, so there is no

burning on cooking surface.

• Heavy duty internal frame 304 type 

stainless steel with reinforcement on

top of 0.157

″ (4 mm).

• 0.118

″ (3 mm) top in 305 type stainless steel.

• “Lasertec connection system” creates seamless work top when units are

connected to each other.

• Raised rear 

c-board permits unit to be connected up against the wall for

better hygiene.

• Unit delivered with four 7-7/8

″ (200 mm) legs as standard (all round

stainless steel kick plates as option).

• Set 4 

castors (2 with brake).

• Left side 

stainless steel 0.118″ (3 mm) panel.

• Right side 

stainless steel 0.118″ (3 mm) panel.

• 5

″ (130 mm) portioning shelf.

• 7.8

″ (200 mm) portioning shelf.

• All round 

stainless steel kick plates.

• Scraper for induction ranges

.