Frigidaire 316902202 Benutzerhandbuch

11

Fig. 1

Fig. 2

Cooktop element power level display windows
The cooktop element power level display features provide a

digital display for each of the heating positions located on

the cooktop. Power levels are easily controlled and

monitored using the window displays in combination with

the corresponding control touch pads.

The Triple radiant heating element (some models) has 3

cooking sizes to select from. This feature allows you to

match the size of the element to the size of the cookware

you are using.

Available power level settings
The cooktop control will display heat levels ranging from Hi

(Fig. 1) to Lo (Fig. 6) and OFF (Fig. 7).
The settings between 9.5 (Fig. 2) and 3.0 (Fig. 3) decrease

or increase in increments of .5 (1/2). The settings between

2.8 (Figs. 4) and 1.2 (Fig. 5) are Simmer settings which

decrease or increase in increments of .2 to Lo (Fig. 6) for

more precise settings at lower heat levels.
Use the “Suggested power level settings table”

provided later in this section to determine the correct

setting for the type of food you are preparing.

Hot surface window message (HE)
After using any radiant element the cooktop will be very

hot. After turning any of these elements OFF, the cooktop

will remain HOT for some time.  The corresponding HE

(hot element-Fig. 8) message will remain ON and turn

OFF once that element position on the cooktop has cooled

sufficiently (Fig. 7).

Sabbath Day feature (Sb) message
The display windows will show the Sb message whenever

the Sabbath Day feature is active (Fig. 10). When

activated, the Sabbath Day feature works for both the

oven and cooktop together.
Once the Sabbath Day feature is active, changes to the

heat levels for the cooktop elements will not show in the

displays. The cooktop will react slower to heat level

changes. See “Setting the Sabbath Day feature” for

complete instructions.

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

Fig. 8

Fig. 9

Fig. 10

Lockout window message ( - - )
The (- -) message will appear whenever the  lockout

feature is active (See Fig. 9). Refer to the lockout

instructions for complete  lockout instructions.