Whirlpool SF360PEE Benutzerhandbuch
11
T
HE
ELECTRONIC
OVEN
CONTROL
CLOSE DOOR
BAKE
BROIL
START ?
PREHEAT
CLEAN
ON
DOOR LOCKED
BAKE
CUSTOM
BROIL
AUTO
CLEAN
TEMP
START
OFF
CANCEL
5 SEC
ENTER
SELF-CLEANING OVEN
Display
•
When you first plug in the range, “PF” will appear
on the display until you press any command pad.
If “PF” again appears on the display, your electric-
ity was off for a while. You will need to reprogram
any temperature adjustments you may have
made. See the “Adjusting the oven temperature
control” section.
on the display until you press any command pad.
If “PF” again appears on the display, your electric-
ity was off for a while. You will need to reprogram
any temperature adjustments you may have
made. See the “Adjusting the oven temperature
control” section.
•
When you are using the oven, the display will
show preheat times and temperature settings.
show preheat times and temperature settings.
•
When you are not cleaning or cooking with the
oven, the display will be blank.
oven, the display will be blank.
•
When setting a function, if you do not press the
start/enter pad within 5 seconds, the Start?
indicator light will flash. If you do not press the
start/enter pad within 5 minutes, the function
will be canceled.
start/enter pad within 5 seconds, the Start?
indicator light will flash. If you do not press the
start/enter pad within 5 minutes, the function
will be canceled.
Indicator lights
An indicator light to the left of the display lights up
when you are in a setting. An indicator light also
lights up to tell you when the door is locked. An
indicator light on the display lights up when the
oven is on.
when you are in a setting. An indicator light also
lights up to tell you when the door is locked. An
indicator light on the display lights up when the
oven is on.
Indicator lights
(see below)
(see below)
Auto clean pad
(p. 22)
(p. 22)
Bake pad
(p. 12)
(p. 12)
Custom broil
pad
(p. 16)
pad
(p. 16)
Temperature
pads
(pp. 12, 15, 17)
pads
(pp. 12, 15, 17)
START
5 SEC
ENTER
Using the control lock
The control lock lets you disable the control panel
command pads. The control lock comes in handy
when you want to prevent others from using the oven.
command pads. The control lock comes in handy
when you want to prevent others from using the oven.
NOTES:
•
You can only use the control lock when the oven is
not in use or the control has not been set.
not in use or the control has not been set.
•
Set the control lock when cleaning the control
panel to prevent yourself from accidentally turning
on the oven.
panel to prevent yourself from accidentally turning
on the oven.
•
You must reset the control lock if the power goes
out for more than 1 second.
out for more than 1 second.
To lock the control panel:
Press and hold the start/enter pad for 5 seconds.
You will hear a single tone and “Loc” will
appear on the temperature display for
5 seconds. “Loc” will then appear when-
ever a command pad is pressed.
appear on the temperature display for
5 seconds. “Loc” will then appear when-
ever a command pad is pressed.
To unlock the control panel:
Press and hold the start/enter pad for 5 seconds.
A single tone will sound and “Loc” will
disappear from the temperature display.
disappear from the temperature display.
START
5 SEC
ENTER
Electronic
display
Start /enter pad
(p. 12)
Of f/cancel pad
(p. 12)
USING YOUR RANGE