Whirlpool W10017640 Benutzerhandbuch

STORAGE DRAWER 

Make sure drawer is cool and empty before cleaning.

For more information, see “Storage Drawer” section.

■

Mild detergent

Remove all stored items from drawer and lift out drawer liner.

■

Clean with mild detergent

■

All-Purpose Appliance Cleaner Part Number 31662 (not 
included):

See “Assistance or Service” section to order.

For normal range use, it is not suggested to remove the oven 
door. However, if removal is necessary, make sure the oven is off 
and cool. Then, follow these instructions. The oven door is heavy.

1. Open oven door all the way.

2. Flip up the hinge latch on each side.

3. Close the oven door as far as it will shut.

4. Lift the oven door while holding both sides.

Continue to push the oven door closed and pull it away from 
the oven door frame.

1. Insert both hanger arms into the door.

2. Open the oven door.

You should hear a “click” as the door is set into place.

3. Move the hinge levers back to the locked position. Check 

that the door is free to open and close. If it is not, repeat the 
removal and installation procedures.

The storage drawer can be removed. Before removing, make sure 
drawer is cool and empty.

1. Pull the storage drawer straight back past the drawer stop 

notch and the end of the side rails.

2. Lift up the back of the drawer and pull the drawer out.

1. Lift up the back of the drawer and place it inside the range in 

its fully forward position.

2. Lift up the front of the drawer to a level position.

3. Slowly push the drawer into the range until the drawer side 

rails engage with the gap in the drawer glides.

4. Once the drawer is fully engaged on both sides, slide the 

drawer back into the closed position. 

NOTE: When you are removing and replacing the storage 
drawer, a slight push may be needed to move the drawer 
stop notch past the drawer glides.

A

B

A