Whirlpool RF387LXH Benutzerhandbuch

Seite von 40
17
Your oven is designed with the ACCUBAKE
®
temperature management system to constantly
monitor oven temperature. The bake element 
will cycle, as needed, to maintain the desired 
temperature. This feature is automatically activated
when the oven is in operation.
1.
Place the racks where you need them.
For more information, see “Positioning racks 
and pans” in “Using the oven” earlier in 
this section.
IMPORTANT: Never place food directly on the 
oven door or the oven bottom.
2.
Choose the bake setting.
3.
Set the temperature (optional).
Do this step if you want to set a temperature
other than 350°F. Press s to raise the 
temperature or t to lower the temperature in
5°F amounts. Use these pads until the desired
temperature shows on the small display.
B
AKING
/
ROASTING
Front of rack
Rear of rack
PRESS
YOU SEE
BAKE
PRESS
YOU SEE
(example for bake at 375°F) 
TEMP 
BAKE
BAKE
USING YOUR RANGE
continued on next page
Roasting meats and poultry
For even cooking, place the meat on a rack in a
shallow pan. This keeps the meat out of the 
drippings and allows the heat to circulate better.
Use a meat thermometer for the most accurate
doneness. Insert it so the tip is in the center of
the largest muscle or thickest portion of the
meat or poultry. Make sure the thermometer is
not touching bone, fat, or the bottom of the pan.
4.
When roasting, put your food in the oven.
You do not have to preheat the oven when 
roasting, unless your recipe recommends it.