Whirlpool SF3020SG Benutzerhandbuch
22
T
ROUBLESHOOTING
Most cooking problems often are caused by little things you can find and fix without tools of any
kind. Check the lists below and on the next page before calling for assistance or service. If you still
need help, see “Requesting Assistance or Service” on page 24.
kind. Check the lists below and on the next page before calling for assistance or service. If you still
need help, see “Requesting Assistance or Service” on page 24.
R
ANGE
DOES
NOT
WORK
S
URFACE
BURNERS
CAUSE
•
The control knob is not set correctly. Push in the control knobs before
turning them. Make sure the control knob is turned to the Light position.
(See page 8.)
turning them. Make sure the control knob is turned to the Light position.
(See page 8.)
•
The pilot light is extinguished. Light the pilot. (See “Lighting standing pilots”
on pages 6 and 7.)
on pages 6 and 7.)
•
The burner ports may be clogged. Clean them with a straight pin. (See
page 18.)
page 18.)
•
The burner ports may be clogged. Clean them with a straight pin. (See
page 18.)
page 18.)
•
The burner needs cleaning. (See page 18.)
•
The air/gas mixture is incorrect. Contact an authorized service technician to
check the air/gas mixture or see the Installation Instructions.
check the air/gas mixture or see the Installation Instructions.
•
The burner is wet from washing. Let it dry.
PROBLEM
The burner fails to light
The burner flames are
uneven
uneven
The burner flames lift off
the ports, are yellow, or
are noisy when turned off
the ports, are yellow, or
are noisy when turned off
The burner makes a
popping noise when on
popping noise when on
CAUSE
•
The range is not properly connected to the gas supply. Contact an
authorized service technician to reconnect the range to the gas supply.
(See the Installation Instructions.)
authorized service technician to reconnect the range to the gas supply.
(See the Installation Instructions.)
PROBLEM
Nothing works
CAUSE
•
You have not turned the oven temperature control knob to a temperature
setting. (See “Adjusting the oven temperature control” section.)
setting. (See “Adjusting the oven temperature control” section.)
•
The main or regulator gas shutoff valve is in the off position. (See the
Installation Instructions.)
Installation Instructions.)
•
The pilot light is out. See “Lighting standing pilots” on pages 6 and 7, contact
an authorized service technician, or see the Installation Instructions.
an authorized service technician, or see the Installation Instructions.
•
The air/gas mixture is incorrect. Contact an authorized service technician to
check the air/gas mixture or see the Installation Instructions.
check the air/gas mixture or see the Installation Instructions.
O
VEN
/
BROILER
BURNER
PROBLEM
The oven does
not work
not work
The burner fails to light
The burner flames lift
away from the ports, are
yellow, or are noisy
away from the ports, are
yellow, or are noisy