Whirlpool 9.76E+13 Benutzerhandbuch

Remove shipping materials, tape

and protective film from range. Keep
cardboard bottom and shipping base
under range. Remove oven racks and
parts package from inside oven.

Take four cardboard corners from the
carton. Stack one cardboard corner on
top of another. Repeat with other two
corners. Place them lengthwise on the
floor behind the range — to support the
range when it is laid on its back.  

Firmly grasp the range and gently

lay it on its back on the cardboard
corners.

Pull cardboard shipping base

firmly to remove.

Use an adjustable wrench to

loosen the leveling legs four complete
turns.

Place

cardboard or
hardboard in front
of range. Stand range
back up onto cardboard or hardboard.

Depending on your electrical

supply, make the four-wire or three-wire
connection to the range following the
“Power supply cord method” or “Direct
wire method” instructions for copper
wire or aluminum wire depending on the
connection needed.

terminal 
block cover

knockout
opening for
40 amp
power
supply cord

knockout
opening
for power
supply
cable

Remove the terminal block cover

located on the back of range.

Contact a qualified floor covering installer
for the best procedure for drilling
mounting holes through your type floor
covering.

Use the anti-tip

bracket template to install
the anti-tip bracket. 

Anti-tip bracket must be
anchored securely to the
sub-floor.

Depending on the
thickness of your
flooring, longer
screws may be
necessary to
anchor the bracket to
the sub-floor. Longer
screws are available from your
local hardware store.

Check that range is on cardboard
shipping base to protect floor covering.