Dacor DR30DH-C Benutzerhandbuch

Planning the Installation

B

Gas 

inlet

A

C

7/8” (2.2 cm) dia. electrical 

connection hole in bottom*

D

Range electrical access, 

cover removed

4 3/4”  

(12.1 cm)

22 1/8”  

(56.2 cm)

8 3/4”  

(22.2 cm)

13 3/4” 

(34.9 cm)

* When using an appliance cord that is not factory 

installed, the hole size must be increased to 1 1/8”  

(2.9 cm) by removing the conduit bracket inside the 

range electrical access box (see page 14).

Gas Supply Requirements

•

Check your local building codes for the proper method of 

installation. In the absence of local codes, this appliance 

should be installed in accordance with the National Fuel Gas 

Code ANSI Z223.1.

•

Be certain that the appliance being installed is correct for 

the gas service provided (natural gas or LP gas). Also, if 

operating the range at an altitude above 4000 ft. (1219 m) 

make sure it is equipped for high altitude operation. Refer to 

the product data label and the table on the inside cover to 

determine the correct model.

•

See the table for gas supply pressure requirements.

•

The regulator inlet accommodates a 3/4” gas line. The range 

ships with a 1/2” to 3/4” adapter connected to the regulator.

Electrical and Gas Supply Connections

Natural

5

6

1/2 psi

LP

10

11

1/2 psi

The ratings above are for reference only - refer to the product 

data label (see inside cover for location).