Topcon GPT-2000 Benutzerhandbuch

4-5

   4 DISTANCE MEASUREMENT

The difference between the measured distance and the input stake out distance is displayed.
Measured distance — Stake out distance = Displayed value

●

In stake out operation, you can select either horizontal distance (HD), relative elevation (VD) and 
slope distance (SD)

Press the [F4](

↓

) key in the distance measuring 

mode to get the function on page 2.

[F4]

Press the [F2](S.O) key.

The data previously set is shown.

[F2]

Select the measuring mode by pressing the [F1] to 
[F3] key.

Example : Horizontal distance

[F1]

Enter the distance for stake out. *1)

[F1]

Enter data

[F4]

Collimate the target (Prism).

Measuring starts.

Collimate P

The difference between the measured distance 
and the stake out distance is displayed.

Move the target until the difference  becomes 0m.

*1) Refer to section 2.6 “How to Enter Alphanumeric characters”.

●

 To return to normal distance measurement mode, stake out distance to "0" or turn the power off.

↓

↓

↓

↓