Schumacher PI-200 Benutzerhandbuch

• 3 •

1.3  Make sure the inverter is not close to any potential source of 

flammable fumes or clothing.

1.4  Do not place the inverter in areas such as battery compartments 

or engine compartments where fumes may accumulate.

1.5  Keep the inverter dry.

1.6  DO NOT allow the inverter to come into contact with rain or moisture.

1.7  DO NOT operate the inverter if you, the inverter, the device being 

operated or any other surfaces that may come into contact with 

any power source are wet. Water and many other liquids can 

conduct electricity, which may lead to serious injury or death.

1.8  Do not place the inverter on or near heating vents, radiators or 

other sources of heat or flammable materials.

1.9  Do not place the inverter in direct sunlight. The ideal air 

temperature for operation is between 50° and 80°F.

1.10 Only connect the power inverter to a 12 volt accessory outlet. Do 

not attempt to connect the inverter to any other power source, 

including an AC power source. Connecting to a 6V or 16V battery 

will cause damage to the inverter.

1.11  Make sure the AC plug connection is tight.

1.12 Do not modify the inverter in any way including cables, plugs or 

switches as it may result in property damage or personal injury.

 Incorrect operation of your inverter may result in 

damage and personal injury. The inverter output is 120V AC and 

can shock or electrocute the same as any ordinary household AC 

wall outlet.

1.14 Do not open – no user serviceable parts inside.

1.15 This device does not include an internal Ground Fault Circuit 

Interrupter (GFCI). 

NOTE: This inverter is designed to be used with a single battery, 

up to group 31 (130 Ah or smaller). The recommended source of 

power is a 12 volt deep cycle battery, due to their high reserve 

capacity. Automotive batteries are recommended for only a short 

period of time of an hour or less.