Lucent Technologies 5 Benutzerhandbuch
MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide
System Manager’s Guide
555-650-118
Issue 1
June 1997
Managing the System
Page 6-59
Adding a DLC Operator Position
6
o
Assign the jack, following the instructions for “DLC Operator Positions” in
the “System Operator Positions” section of
the “System Operator Positions” section of
System Programming
, Chapter
3, or the summary programming instructions below.
NOTE:
This task requires an idle condition: System Idle.
o
Assign the lines/trunks, following the instructions for “Assign Trunks or
Pools to Telephones” in the “System Operator Positions” section in
Pools to Telephones” in the “System Operator Positions” section in
System
Programming
, Chapter 3.
NOTE:
This task requires an idle condition: Extension Forced Idle for this
extension jack. Also, if you need additional SA or SA Originate Only
buttons, you should remove all lines using system programming,
then assign the buttons using centralized telephone programming.
For more information, see
extension jack. Also, if you need additional SA or SA Originate Only
buttons, you should remove all lines using system programming,
then assign the buttons using centralized telephone programming.
For more information, see
System Programming
.
o
Using centralized telephone programming, assign Ringing Options as
described in Chapter 5, “Centralized Telephone Programming,” in
described in Chapter 5, “Centralized Telephone Programming,” in
System
Programming
.
o
If you are adding a personal line, Loudspeaker Paging, or Pool buttons
(Hybrid/PBX only), assign the outside lines/trunks to the buttons on the
telephone following the instructions in “Assign Trunks or Pools to
Telephones” in the “Telephones” section of
(Hybrid/PBX only), assign the outside lines/trunks to the buttons on the
telephone following the instructions in “Assign Trunks or Pools to
Telephones” in the “Telephones” section of
System Programming
,
Chapter 3.
NOTE:
You may choose to copy line/trunk button assignments that other
extensions have, for example, a Loudspeaker Paging button. For
more information, see “Copy Line/Trunk Assignments” in the
“Telephones” section of
extensions have, for example, a Loudspeaker Paging button. For
more information, see “Copy Line/Trunk Assignments” in the
“Telephones” section of
System Programming
, Chapter 3.
o
Assign intercom or system access buttons by following the instructions in
“Assign Intercom or System Access Buttons” in the “Telephones” section of
“Assign Intercom or System Access Buttons” in the “Telephones” section of
System Programming
, Chapter 3. Also, you may choose to use the Copy
NOTE:
This task requires an idle condition: Extension Forced Idle.
o
If the extension requires a dedicated voice or voice pair of extension jacks
to provide Voice Announce to Busy or to provide voice and data features,
identify it to the system as such by following the instructions in “Analog
Multiline Telephones with Voice Announce to Busy” in the “Telephones”
section of
to provide Voice Announce to Busy or to provide voice and data features,
identify it to the system as such by following the instructions in “Analog
Multiline Telephones with Voice Announce to Busy” in the “Telephones”
section of
System Programming
, Chapter 3, or the instructions in “Data
Features” in Chapter 4 of
System Programming
.