Toshiba Satellite Pro L630/L635 Series Benutzerhandbuch

User’s Manual

6-11

Power and Power-up Modes

■

If you are not going to use the computer for more than eight hours,

disconnect the AC adaptor.

■

Store spare battery packs in a cool dry place out of direct sunlight.

Replacing The Battery Pack

When the battery pack reaches the end of its operating life you will need to

install a new one. If the Battery indicator flashes amber shortly after fully

recharging the battery, the battery pack needs to be replaced.

You might also replace a discharged battery pack with a charged spare
when you are operating your computer away from an AC power source.
This section explains how to remove and install battery packs.

Removing The Battery Pack

To remove a discharged battery, follow the steps as detailed below:

1. Save your work.
2. Turn the computer’s power off. Make sure the Power indicator is off.
3. Remove all cables connected to the computer.
4. Turn the computer upside down with the back of the computer facing

you.

5. Slide the battery pack locking latch toward the unlock position

Figure 6-1 Slide the locking latch to the unlocked position

■

When handling battery pack, be careful not to short circuit the

terminals. Also do not drop, hit or otherwise apply impact; do not

scratch or break the casing and do not twist or bend the battery pack.

■

Do not remove the battery pack while the computer is in Sleep Mode.

Data is stored in RAM, so if the computer loses power it will be lose.

■

In Hibernation Mode, data will be lose if you remove the battery or

disconnect the AC adaptor before the save is completed. Wait for the

HDD/ODD/eSATA indicator, optical disc drive indicator and external

device indicator to go out.

ATTERY

ACK

OCK