Lowrance electronic X-28 Benutzerhandbuch

adjustable by pressing a menu key until the
chart speed menu appears. Chart speed is
set to maximum when the X-28 is first turned
on. To decrease it, press the down arrow key.
Press the up arrow key to increase the speed
again. The percentage of chart speed also
shows on this menu. Echoes scrolling onto
the screen will also show the effects of the
change. If you reach the maximum or mini-
mum level, an warning tone sounds.

To stop the chart, first clear any menu from
the screen by pressing the PWR/CLEAR key.
You can’t stop the chart while a menu is displayed. Now press the up arrow
key. The chart will freeze and the word “STOP” appears at the top right
portion of the screen. To start the chart, press the up arrow key again.

DISPLAY MODE
The X-28 has three different screen modes.
To change modes, press the MENU key until
the “DISP MODE” (Display Mode) menu ap-
pears. Then press the up or down arrow keys
until the desired mode number appears. The
modes are as follows:

CHT 1 (Chart #1)
1. Automatic On
2. Fish I.D. Off
3. Digital depth display On.

CHT 2 (Chart #2)
This is the High Speed Scroll mode. It has the
following features:
1. Automatic Off
2. Fish ID Feature Off
3. All Digital Displays Off