Panasonic AJ-D230H Benutzerhandbuch

S u p e r i m p o s e d

S u p e r i m p o s e d

d i s p l a y

d i s p l a y

108 FORMAT SEL 0000

DVCPRO

This selects the format when an L cassette is used.

0001

DV  0: DVCPRO mode

0002

DVCAM  1: DV mode

2: DVCAM mode

<Note>
The cassette tape is played back in one of the modes listed below depending on the tape type and
settings used.

S size cassette

DV

DV

DVCAM

M size cassette

DVCPRO

DVCPRO

DVCPRO

L size cassette

DVCPRO

DV

DVCAM

Use tapes specially designed for DVCPRO applications with this unit. However, if DV tapes or DVCAM

tapes are to be used in the playback mode, it is recommended that playback be limited to as short a
period of time as possible.

109 REC INHIBIT

0000

OFF

This selects whether to inhibit recording on the VTR.

0001

ON

0: Recording is not inhibited.

1: Recording is inhibited.

The underlined number and item are the factory settings.

S u p e r i m p o s e d

d i s p l a y

200

BAUD RATE

0000
0001
0002
0003
0004

201

DATA LENGTH

0000
0001

202

STOP BIT

0000
0001

203

PARITY

0000
0001
0002

204 ACK RETURN 0000

0001

S u p e r i m p o s e d

d i s p l a y

1200

This sets the RS-232C transfer rate (baud rate).

2400
4800

9600

19200

8BIT This sets the RS-232C data length.

7BIT

1BIT

This sets the RS-232C stop bit length.

2BIT

NONE

This sets whether the RS-232C parity bit is to be used

ODD

and, if so, whether with even or odd parity.

EVEN

0: The parity bit is not used.

1: The parity bit is used with odd parity.

2: The parity bit is used with even parity.

OFF

This sets the RS-232C return data.

ON

0: The ACK code is not returned.

1: The ACK code is returned.

The underlined number and item are the factory settings.

After the settings of items No.200 through No.203 have been changed, the new settings will not
take effect until the power is switched on. This means that the power must be turned off and

back on again after these settings are changed.

26