GE EPM 5200 Benutzerhandbuch

5–36

EPM 5300 SERIES ADVANCED POWER METERS – INSTRUCTION MANUAL

RESETTING VALUES

CHAPTER 5: OVERVIEW

Use the reset function if a new value is desired.  It is available in two different modes. 

1.UNPROTECTED MODE:  Allows quick and easy resetting of max/min values.

2.PROTECTED MODE: Prevents unauthorized resetting the max/min and totaled power 
functions. 

Note

Even if the unprotected mode is selected during programming, the KWH and negative 
KWH are always in protected mode. The following examples are for the max/min.

To reset the min of Amps A:

Step 1:

a. If not already in the Amps category 
press AMPS, then PHASE/NEXT until 
desired phase is indicated.

Step 2:

a. Press MAX/MIN/LIMITS twice to 
access the min value for Amps A.

a. While the min value is displayed, 
press PHASE/NEXT to reset it.

The display blanks; a checkmark 

appears confirming reset. 

Repeat this procedure for each 

value you wish to reset.