Russound CAM6.6T-S1 Benutzerhandbuch

18

To select the tuner, push 

and choose the

source number preassigned to the AM/FM tuner (1),

or use the UNO numeric source inputs at the bottom

of the UNO-LRC1. 

Push 

to toggle between AM/FM reception.

Use the Channel 

and 

or 

and

for manual tuning. To move quickly through the

channels, press and hold the button for more than

1.5 seconds. To directly select a station, enter the

three- or four-digit channel or frequency (1071 for

107.1, etc.). European regions use five-digit station

frequencies.

The SEEK function is performed by pressing and

releasing the Select 

or 

or 

. To seek

higher frequency station press 

. Press 

for

lower frequencies. Tuning begins at the current fre-

quency, seeks upward (or downward) and stops at the

next tuned station. Pushing 

or 

again con-

tinues the SEEK function. Once the highest frequency

is reached, the tuner continues SEEK mode at the

lowest frequency. 

To scan, press and hold then release 

. The

tuner scans through tuned stations with a 5-second

preview before moving to the next station. To end

scanning, press 

again.

To select a bank, press and hold 

for bank up

or 

for bank down.  

The AM/FM tuner has six banks of preset memory

settings, and each bank holds six presets for a total

of 36 possible presets. 

1. Select a bank - press and hold 

or 

until the desired bank # (1-6) appears on the keypad. 

2. Select a station - tune to the desired frequency

with

, 

,

or . 

3. Press and hold a # button (1-6) until M(#) SA(ved)

is displayed. 

Press 

and 

to scroll through a loop dis-

play of all the configured memory presets for the cur-

rently selected bank. 

Press the 

button to mute/unmute the tuner

audio output.