Russound CAM6.6T-S1 Benutzerhandbuch

22

Unpacking the System Components
• Keep the original carton and packing materials
for future shipment or storage. 

• Check for any visible signs of damage. If
you encounter any concealed damage, con-
sult your Russound dealer before proceeding
to install the unit.

• Retain the sales receipt as it establishes the
duration of the limited warranty and provides
information for insurance purposes.

• 1 (one) CAM6.6 Controller/Amplifier

• 6 (six) UNO-S1 System Control Keypads

• 1 (one) UNO-LRC1 Learning/Preprogrammed

Remote Control

• 6 (six) 845.1 Micro Emitters

• Drill with a 1/2” x 6” drill bit

• Keyhole saw

• Flat head screwdriver (medium size) 

• Phillips Screwdriver (cordless recommended) 

• 110 punchdown tool (included)

• Modular RJ-45 crimper and connectors

• Pair of diagonal cutters or wire strippers

• Stud finder

• Steel wire fish tape

• Cable staples 

• Single-gang electrical work boxes 

System Installation Considerations
There are several factors to consider before
installing the Russound CAM6.6T-S1 system:

• What are the intended listening zones? 

• What system options and accessories
might be required for features such as local
sources, etc.?

• From where in each zone will the user prefer
to control the system? Where will the keypads
be located? Where will the speakers be located?  

• Where will the source equipment be located?
The CAM6.6 must have proper ventilation above
and below for air circulation and heat dissipation.
A rack-mount location may require fans and vents.

Connection Tips
• It is recommended that the CAM6.6 and the
source equipment be plugged into a dedicated
20-amp circuit with an isolated ground. A power
line conditioner can reduce interference prob-
lems caused by noise found in some electrical
systems.

• Disconnect all live power cords before making
connections to the controller.

• Verify that all connections and polarity are
correct.

• Keep all power cords away from all signal
cables to prevent humming from induced noise.

• Choose reliable signal cables/patch cords.

• Label all wires with room location at both ends
of the wire.