AT&T MLS-6TM Benutzerhandbuch

Dial Mode

#201

Identifies each outside line as either touch-tone or rotary.

Valid Entries:   ✓  

1 

= 

Touch-tone line

 2 = Rotary line

If you are using touch-tone phones on rotary lines, you may

need to adjust the Rotary Dialing Timeout (#108).

1.   

Press [ Feature  ] [ 0 ] [ 0 ] [ System Program ] [ System Program ]  [ # ] [ 2 ] [ 0 ] [ 1 ] .  The  

display  reads:

Dial Mode

Line:

2.   Enter the first line to be programmed. For example, to program line 8,

press [ 8 ] .  The display reads:

Dial Mode L8

1 Touch Tone

3. To change the dial mode, press [ Next Data ] .   The display reads:

Dial Mode L8

2 Rotary

To program another line, press [Next Item]  or [ Prev Item ] until the correct line number shows
on the display.  Follow step 3 to change the dialing mode.  Repeat for all lines that you
want to change.

✓ 

= Factory Setting

To go to the next procedure:  [ Next Proc ] 

To go to a specific procedure:    [ # ]  [  2 ] [ 0 ] [ 1 ] .  The 

To go to the previous procedure:  [ Prev Proc ] 

(where XXX is the procedure number)

To return data to the factory setting:  [ Remove ] 

To exit system programming:  [ 

Feature ] [ 0 ] [ 0 ] 

System Programming  3-9