Emerson 600 Benutzerhandbuch

7120 New Buffington Road

Florence, KY 41042

Application Engineering: 800 626 2093

www.PowerTransmissionSolutions.com

•  Periodic inspections should be performed. Failure to perform proper maintenance 

can result in premature product failure and personal injury.

•  All electrical work should be performed by qualified personnel and compliant with 

local and national electrical codes.

•  Read and follow all instructions carefully.
•  Disconnect and lock-out power before installation and maintenance.   

Working on or near energized equipment can result in severe injury or death.

•  Avoid contact with energized circuits or rotating parts.
•  Be sure shaft key is fully captive before unit is energized.
•  Do not operate equipment without guards in place.  Exposed equipment can 

result in severe injury or death.

Browning, Emerson and Emerson Industrial Automation are trademarks of Emerson 

Electric Co. or one of its affiliated companies. 

©2014 Emerson Power Transmission Corp., All Rights Reserved.

MCIM14006E  • Form 9884E • Printed in USA

Motor Carriage

Tension Nut

Mounting Brackets

Tension Rod

Carriage Rods

1.  Mount the motor on the motor base using the recommended 

grade 5 bolts and torques listed in table 1.

Table 1

Motor Base

Bolt Size

Torque (Grade 5 plated )

BSAMBN601

5/16-18

13 Lb-Ft

BSAMBN605

3/8-16

23 Lb-Ft

BSAMBN607

3/8-16

23 Lb-Ft

BSAMBN613

3/8-16

23 Lb-Ft

BSAMBN621

1/2-13

57 Lb-Ft

BSAMBN623

1/2-13

57 Lb-Ft

2.  Mount the sheaves on the Driver and Driven Shafts.