Schneider Electric Altivar 12 Benutzerhandbuch
![Schneider Electric](https://files.manualsbrain.com/attachments/984caf1d286e5e02d462a79fde1bf5fead2d9a5f/common/fit/150/50/91444bf287fb583af13341fc3281cd3c182bc046c845d04ce567acdbd94e/brand_logo.gif)
112
BBV28581 05/2010
Fault detection codes displayed on the remote display terminal
(1) Flashing
Code
Name
Description
InIt
On initializing itself
• Micro controller initializing
• Communication configuration search
• Communication configuration search
COM.E
(1)
Communication error
• It has 50ms time out error.
• This message is shown after 220 retry attempts.
• This message is shown after 220 retry attempts.
A-17
(1)
Key alarm
• Key has been pressed consecutively for more than 10 seconds.
• Membrane switch disconnected.
• Keypad woken up while a key is being pressed.
• Membrane switch disconnected.
• Keypad woken up while a key is being pressed.
cLr
(1)
Confirm Fault reset
• This message appears if the STOP key is pressed when there is a keypad fault.
dEU.E
(1)
Drive mismatch
• Drive type (brand) did not match with keypad type (brand)
?
rOM.E
(1)
ROM abnormality
• Keypad ROM abnormality detected by the checksum calculation.
rAM.E
(1)
RAM abnormality
• Keypad RAM abnormality detected.
CPU.E
(1)
The other defect
• The other detected fault.