Lowrance electronic X135 Benutzerhandbuch

62

To adjust Sensitivity:
1. From the Sonar Page, press 

|

.

2. The Sensitivity Control Bar appears. Press 

↓ to decrease sensitivity;

press 

↑ to increase sensitivity. When it's set at the desired level, press

. (When you reach the maximum or minimum limit, a tone sounds.)

To turn off HyperScroll:
1. From the Sonar Page, press 

|

↓ to 

|

.

2. The Ping Speed Control Bar appears. Press

↓ to decrease ping speed

to 50 percent. When it's set at the desired level, press 

.

When you boost ping speed and switch into HyperScroll, the width of
the FasTrack bar graph display doubles in width at the right side of the
screen. The allows you to better see the virtually instantaneous sonar
returns, just as you would on a flasher sonar unit. For more informa-
tion on FasTrack, see it's entry in this section.

Pop-up Help

Help is available for virtually all of the menu labels on this unit. By
highlighting a menu item and leaving it highlighted for a few seconds, a
"pop-up" message appears that describes the function of the menu item.
This feature is on by default.

To set up Popup Help: Press 

|

|

↓ to 

. With the

option highlighted, press 

ENT 

to check it (turn on) and uncheck it (turn

off.) After the option is set, press 

 to return to the page display.

    

Main Menu, left, with Pop-up Help command highlighted. At right, this

example shows the Pop-up Help message for the Calibrate Water Speed

command, located on the Main Menu.