Weber 3500 LX Benutzeranleitung
Step 25
Complete accessory installation
You will need: Warm-Up Basket, warming rack, work
table, three tubing plugs, thermometer and a hammer.
table, three tubing plugs, thermometer and a hammer.
Insert one end of the Weber Warm-Up Basket into the hole
in the right end of the lid and the other end into the slot in
the left end of the lid. Figure 37 (a).
in the right end of the lid and the other end into the slot in
the left end of the lid. Figure 37 (a).
Set the warming rack into the slots at the rear of the
cooking box. Figure 37 (b).
cooking box. Figure 37 (b).
Set the work table onto the left side rails. Figure 37 (c).
Insert the thermometer into its holder. Figure 37 (d).
Insert the tubing plugs into the ends of the frame. To fully
seat the plugs, you may have to tap them lightly with a
hammer. Figure 37 (e).
seat the plugs, you may have to tap them lightly with a
hammer. Figure 37 (e).
Figure 37
(a)
(b)
(c)
(d)
(e)
27
Step 24
Install the accessory rack
You will need: accessory rack.
Rest the left end of the accessory rack on the base
panel. Figure 36 (a).
panel. Figure 36 (a).
Insert the right hooks into the right side frame slots.
Figure 36 (b).
Figure 36 (b).
Raise the left end up and slide left hooks into the left side
frame slots. Figure 36.
frame slots. Figure 36.
Figure 36
(b)
(a)
Right side
frame
Left side
frame slots
Left hooks