Summit 460-NG Benutzerhandbuch
4
built-in struCture Cutout dimensions
All dimensions are to finished surfaces.
m warninG: all countertop finished surfaces must be
constructed of a noncombustible material.
◆
loCatinG Your Grill
When determining a suitable location for your Summit
®
gas grill installation, give
attention to concerns such as exposure to wind, proximity to traffic paths, and keeping
any gas supply lines as short as possible. Never locate the Summit
any gas supply lines as short as possible. Never locate the Summit
®
gas grill in a
garage, breezeway, shed, under an unprotected overhang, or other enclosed area.
Locate the grill and structure so there is enough room to safely evacuate the area in
case of a fire.
Locate the grill and structure so there is enough room to safely evacuate the area in
case of a fire.
ClearanCe from surfaCes or struCtures
m warninG: Clearance from any surface or structure is
m warninG: Clearance from any surface or structure is
24" (610 mm) from the back and sides of the grill. refer
to “typical Gas supply installation” before starting
installation.
to “typical Gas supply installation” before starting
installation.
m warninG: the structure, “island”, countertops, and
adjacent work areas for the built-in grill installation must be
built from noncombustible materials only.
built from noncombustible materials only.
NOTE: If you have questions on what materials are considered noncombustible, contact
your local building materials supplier or fire department.
your local building materials supplier or fire department.
◆
bUILT-IN cUToUT GENEraL DImENSIoNS
1
2
3
460
660
ToLEraNcES
1
34" (864 mm)
42" (1067 mm)
±1/4" (6 mm)
2
36" (914 mm)
36" (914 mm)
max
3
24 5/16" (618 mm)
24 5/16" (618 mm)
±1/4" (6 mm)
cLEaraNcES
1
2
1
1
1
24" (610 mm) any surface
2
27" (686 mm) minimum for lid clearance
bUILT-IN cUToUT DImENSIoNS