Meco 2400 Benutzerhandbuch

19

1) Disconnect LP gas cylinders from Main Grill, Side Burner 

and Lantern. Re-cap LP cylinders with the Safety Caps. 
If storing the LP cylinders in folded legs for transport, leave 
the 1pound disposable cylinders in the leg cylinder holders.  
(See Step 3, page 9) Note: Hold the cylinder stationary 
against the bottom base in the holder pocket until leg is 
fully closed and snaps into the spring lever. The legs will 
not fully close if this is not done properly. Otherwise, store 
LP Gas cylinders outside in a dry, well-ventilated area, 
away from any sources of heat or ignition.

2) Disconnect Lantern from the gas supply tube. Remove  

Gas Supply Tube from the PTO

TM

opening in grill body and 

store separately from grill in a safe and convenient place.

3) If storing the gas grill outdoors in the set-up position, 

remove lantern and gas tube then simply place a grill cover 
over the grill. The grill may be stored indoors only if the LP
cylinders are disconnected from the gas grill and stored 
outdoors. Store the gas tube and lantern in a safe place.

4) If storing grill for transport in the grill cover:

a) Install the Side Burner Cover on the Side Burner Table.  

Remove the Side Burner Table or the Side Table. Turn 
the Side Burner upside down. Push the hose back down  
into the collar while pulling with the other hand. 
(FIG. 19A) Tuck the hose within the flange. 

b) Place Side Burner (or Side Table) upside down on the 

Cooking Grid under the Hood. (FIG. 19B) Make sure 

the collar is toward the front so the hood will close. 

c) Close and latch the Hood. Secure the 1 pound. LP gas 

cylinders in the leg holders and fold the legs under the 
grill. (FIG. 19C)

d) For temporary storage or transport, just pick up the grill 

and carry it to another destination. (FIG. 19D)